Request a free estimate
Showing 1–6 of 9 resultsSorted by price: high to low
Laboratory table tops and work surface slabs are the primary contact point for nearly every lab activity. They need to handle chemical exposure, moisture, physical wear, and routine disinfection without degrading over time. This page covers CatLabPro’s in-stock selection of black phenolic resin table tops, work surface slabs, and matching backsplash and side splash components.
Black Phenolic Resin: The Standard for Lab Work Surfaces
All table tops and slabs on this page are constructed from 3/4″ black phenolic resin. Phenolic resin is a dense, non-porous material that resists a broad range of laboratory chemicals, moisture, and moderate heat. Because the surface is non-porous, it does not support bacterial growth and can be disinfected easily, making it well-suited for medical, research, pharmaceutical, and educational lab environments.
Phenolic resin performs reliably in wet lab applications, teaching labs, and general-purpose research settings. It offers a practical balance of chemical resistance, durability, and cost when compared to epoxy resin or stainless steel. It is not the right choice for environments with sustained exposure to extreme heat or highly concentrated acids, where epoxy resin would be the more appropriate selection.
CatLabPro work surfaces are manufactured to align with SEFA standards, ensuring suitability for professional laboratory use.
What’s in This Category
All products are 3/4″ thick black phenolic resin and available in-stock. Sizes range from 30″W x 48″L through 30″W x 96″L in both table top and work surface slab configurations. Matching backsplash pieces (4″H) are available in 48″, 72″, and 96″ lengths, and a 30″ side splash is also stocked. These components are designed to integrate with CatLabPro casework and lab table bases.
Work surface slabs (Model 343004, 343006, 343008) are intended for mounting on cabinet casework. Table tops (Model 34TT48BLAK, 34TT72BLAK) are configured for use with freestanding lab table frames. If you are replacing an existing surface or outfitting a new bench run, contact CatLabPro to confirm compatibility with your cabinet or table configuration before ordering.
Selecting the Right Size
Measure the full cabinet or table frame run before ordering, including any overhang requirements. Standard depth across this product range is 30″. Length options of 48″, 72″, and 96″ cover most single-run workstation configurations. For longer bench runs or irregular layouts, contact CatLabPro to discuss whether a custom configuration or multiple slabs with filler components is the better approach.
If your application requires sink cutouts, cup sink knockouts, or fixture pipe slots, those custom configurations are available. Contact CatLabPro with your specifications.
To discuss options or request a free estimate, contact the CatLabPro team directly.
FAQs
What is the difference between a work surface slab and a table top?
Both are 3/4″ black phenolic resin and functionally the same material. Work surface slabs (such as Models 343004, 343006, and 343008) are designed to be mounted on top of laboratory casework or cabinet bases. Table tops (such as Models 34TT48BLAK and 34TT72BLAK) are configured to fit CatLabPro’s freestanding lab table frames. If you are unsure which is correct for your setup, contact CatLabPro before ordering.
Is phenolic resin the right material for my lab application?
Phenolic resin is a reliable, cost-effective choice for most general-purpose, wet lab, research, and educational environments. It resists common laboratory chemicals, moisture, and routine disinfection. For labs with frequent exposure to concentrated acids or high sustained heat, epoxy resin is typically the stronger option. CatLabPro can help you evaluate which surface material fits your specific conditions.
Are these work surfaces SEFA-compliant?
Yes. CatLabPro laboratory work surfaces are manufactured to meet or align with SEFA standards, ensuring they are suitable for professional laboratory environments.
Can backsplash and side splash pieces be ordered to match?
Yes. Black phenolic resin backsplash pieces (4″H x 48″L, 4″H x 72″L, and 4″H x 96″L) and a 30″ side splash are stocked in the same material and finish as the work surface slabs and table tops. They are available to order separately.
Can these surfaces be cut for sinks or fixtures?
Standard slabs and table tops are sold as flat, uncut pieces. If you need cutouts for sinks, cup sinks, or fixture pipe slots, contact CatLabPro to discuss custom configurations before placing your order.
How do I maintain a phenolic resin work surface?
Phenolic resin surfaces are low-maintenance. Clean up chemical spills immediately to prevent prolonged contact. Routine cleaning with appropriate lab-grade disinfectants is safe and recommended. Avoid abrasive scrubbing pads that could scratch the surface over time. With consistent maintenance, phenolic resin surfaces provide long service life in demanding lab environments.
Laboratory table tops and work surface slabs are the primary contact point for nearly every lab activity. They need to handle chemical exposure, moisture, physical wear, and routine disinfection without degrading over time. This page covers CatLabPro's in-stock selection of black phenolic resin table tops, work surface slabs, and matching backsplash and side splash components.
Black Phenolic Resin: The Standard for Lab Work Surfaces
All table tops and slabs on this page are constructed from 3/4" black phenolic resin. Phenolic resin is a dense, non-porous material that resists a broad range of laboratory chemicals, moisture, and moderate heat. Because the surface is non-porous, it does not support bacterial growth and can be disinfected easily, making it well-suited for medical, research, pharmaceutical, and educational lab environments.
Phenolic resin performs reliably in wet lab applications, teaching labs, and general-purpose research settings. It offers a practical balance of chemical resistance, durability, and cost when compared to epoxy resin or stainless steel. It is not the right choice for environments with sustained exposure to extreme heat or highly concentrated acids, where epoxy resin would be the more appropriate selection.
CatLabPro work surfaces are manufactured to align with SEFA standards, ensuring suitability for professional laboratory use.
What's in This Category
All products are 3/4" thick black phenolic resin and available in-stock. Sizes range from 30"W x 48"L through 30"W x 96"L in both table top and work surface slab configurations. Matching backsplash pieces (4"H) are available in 48", 72", and 96" lengths, and a 30" side splash is also stocked. These components are designed to integrate with CatLabPro casework and lab table bases.
Work surface slabs (Model 343004, 343006, 343008) are intended for mounting on cabinet casework. Table tops (Model 34TT48BLAK, 34TT72BLAK) are configured for use with freestanding lab table frames. If you are replacing an existing surface or outfitting a new bench run, contact CatLabPro to confirm compatibility with your cabinet or table configuration before ordering.
Selecting the Right Size
Measure the full cabinet or table frame run before ordering, including any overhang requirements. Standard depth across this product range is 30". Length options of 48", 72", and 96" cover most single-run workstation configurations. For longer bench runs or irregular layouts, contact CatLabPro to discuss whether a custom configuration or multiple slabs with filler components is the better approach.
If your application requires sink cutouts, cup sink knockouts, or fixture pipe slots, those custom configurations are available. Contact CatLabPro with your specifications.
To discuss options or request a free estimate, contact the CatLabPro team directly.
FAQs
What is the difference between a work surface slab and a table top?
Both are 3/4" black phenolic resin and functionally the same material. Work surface slabs (such as Models 343004, 343006, and 343008) are designed to be mounted on top of laboratory casework or cabinet bases. Table tops (such as Models 34TT48BLAK and 34TT72BLAK) are configured to fit CatLabPro's freestanding lab table frames. If you are unsure which is correct for your setup, contact CatLabPro before ordering.
Is phenolic resin the right material for my lab application?
Phenolic resin is a reliable, cost-effective choice for most general-purpose, wet lab, research, and educational environments. It resists common laboratory chemicals, moisture, and routine disinfection. For labs with frequent exposure to concentrated acids or high sustained heat, epoxy resin is typically the stronger option. CatLabPro can help you evaluate which surface material fits your specific conditions.
Are these work surfaces SEFA-compliant?
Yes. CatLabPro laboratory work surfaces are manufactured to meet or align with SEFA standards, ensuring they are suitable for professional laboratory environments.
Can backsplash and side splash pieces be ordered to match?
Yes. Black phenolic resin backsplash pieces (4"H x 48"L, 4"H x 72"L, and 4"H x 96"L) and a 30" side splash are stocked in the same material and finish as the work surface slabs and table tops. They are available to order separately.
Can these surfaces be cut for sinks or fixtures?
Standard slabs and table tops are sold as flat, uncut pieces. If you need cutouts for sinks, cup sinks, or fixture pipe slots, contact CatLabPro to discuss custom configurations before placing your order.
How do I maintain a phenolic resin work surface?
Phenolic resin surfaces are low-maintenance. Clean up chemical spills immediately to prevent prolonged contact. Routine cleaning with appropriate lab-grade disinfectants is safe and recommended. Avoid abrasive scrubbing pads that could scratch the surface over time. With consistent maintenance, phenolic resin surfaces provide long service life in demanding lab environments.